Skip Navigation Links
Home
About UsExpand About Us
DepartmentsExpand Departments
ResourcesExpand Resources
Placement
Alumni
For ParentExpand For Parent
RDUExpand RDU
ActivitiesExpand Activities
Contact Us
Grievances
SABARINATH P
[10120010]
Associate Professor 1
Mechanical Engineering
Qualification :B.E.(MECH.ENGG)., M.E.(MANU.TECH) (PH.D.,)
Experience :16.0 (Y.M)
Email ID :centumsabu@yahoo.com


Academic Profile
 Nos.
Research Work1
Paper Publication (International)8
Resource Person5
Awards / Achievements5
Organized Events - Conferences/FDP/Workshop and Others5
Paper Presentation 30
Seminars/Workshop Attended27
Others2


Research Work
S.No.TitleFrom DateTo DatePeriodDetails
1. Design optimization--July 2009 to June 2015Registered for Ph.D under part time Scheme at Anna University, Trichy under the guidance of Dr.M.R.Thansekhar, HOD / Mech, KLNCE and coguided by Dr.R.Saravanan, Dean, SKCT, Coimbatore. Course work and comprehension viva completed



Paper Publication (International)
S.No.TitleFrom DateTo DatePeriodDetails
1. Performance Evaluation of particle swarm optimization Algorithm for the optimal design of belt pulley system--December 2013Name of the Authors: P.Sabarinath, M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: Lecture Notes in Computer Science, Springer Publications Volume No. & Year: 8297, Dec 2013 Page Numbers: 601 - 616
2. Multi Objective Design Optimization of two bar truss using NSGA II and TOPSIS--June 2014Name of the Authors: P.Sabarinath, M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: Advanced Materials Research Trans Tech Publications, Switzerland Volume No. & Year: 984-985, June 2014 Page Numbers: 419-424
3. Optimum Design of Disc Brake Using NSGA-II Algorithm--March 2014Name of the Authors: P.Sabarinath,R.Hariharasudhan,M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: International journal of Innovative research in Science, Engineering and Technology Volume No. & Year: Volume 3, Special Issue 3, March 2014 Page Numbers: 1400 - 1405
4. Performance Evaluation of Differential Evolution and Particle Swarm Optimization Algorithms for the Optimal Design of Closed Coil Helical Spring--March 2014Name of the Authors: P.Sabarinath, N.B.Karthik babu,M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: International journal of Innovative research in Science, Engineering and Technology Volume No. & Year: Volume 3, Special Issue 3, March 2014 Page Numbers: 1423 - 1428
5. Performance Evaluation of Differential Evolution and Particle Swarm Optimization Algorithms for Optimizing Power Loss in a Worm Gear Mechanism--20.11.2014Name of the Authors: P.Sabarinath, M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: Lecture Notes in Electrical Engineering, Springer Publications Volume No. & Year: 326, December 2014 Page Numbers: 433 - 441
6. Multiobjective Optimization Method Based on Adaptive Parameter Harmony Search Algorithm--6.2.15Name of the Authors: P.Sabarinath, M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: Journal of Applied Mathematics, Hindawi Publishing Corporation Volume 2015, Article ID 165601, 12 pages DOI: dx.doi.org/10.1155/2015/165601 Anna University Annexure I Journal
7. Performance Evaluation Of Differential Evolutionand Particle Swarm Optimization Algorithms For The Optimal Design Of Hollow Shaft--December 2014Name of the Authors: P.Sabarinath, M.R.Thansekhar, R.Saravanan Name of the Journal & Publisher: International Journal of Applied Engineering Research, Research India Publications ISSN 0973-4562 Vol. 9 No.26 (2014) pp. 8744-8747 Anna University Annexure II Journal
8. Energy conservation by design optimization of flywheel using Flower pollination Algorithm--24-03-2015Name of the Authors: P.Sabarinath, R.Karthick, M.R.Thansekhar, R.Saravanan Name of the Journal :Journal of Chemical and Pharmaceutical Sciences ISSN: 0974-2115 Special Issue 7: 2015 pp.166 – 171 (Anna university Annexure II Journal)



Resource Person
S.No.TitleFrom DateTo DatePeriodDetails
1. Lectures delivered04-03-2011-3.4.11, 17.4.11Delivered Lectures for front line staff of Postal Department on the topic “Self Esteem, Team work and Feelings” for three days.
2. Lecture delivered12-06-2004-6th to 11th Dec 2004Delivered Lectures on three different topics in the Anna University, chennai Sponsored Six days Faculty Development Programme on Design of Jigs, Fixtures & Press tools during 6th to 11th Dec 2004.
3. Lectures delivered--19.8.10 to 21.8.10Delivered a Lecture on CNC Programming in the three day training programme on CNC Training to our Department students from 19.8.10 to 21.8.10
4. Lecture delivered--19.3.11Delivered a Lecture on “Aesthetics in Design” during a 2 day FDP on “Teaching Methodology for Transmission system Design” sponsored by Anna University of Technology, Madurai
5. Two week AICTE sponsored FDP Programme on “Teaching Methodology for Machine design--29.04.2013 to 12.05.2013Handled the following lectures in the two week FDP 29.04.2013 - Introduction To Engg Design 30.04.2013 - Design for variable Loading 01.05.2013 - Design of Shafts - Tutorial 02.05.2013 - Design of Belt Drives - Tutorial 03.05.2013 - Design of chain Drives - Tutorial 06.05.2013 - Design of Springs 09.05.2013 - Design of Springs - Tutorial 10.05.2013 - Mission 10X Learning Approach 12.05.2013 - Design of Bearings - Tutorial



Awards / Achievements
S.No.TitleFrom DateTo DatePeriodDetails
1. certificate of Appreciation--june 2013received certificate of Appreciation for securing 100% pass in the subject Maintenance Engineering during Apr/ May 2013 Anna university Examinations
2. certificate of Appreciation--June 2014received certificate of Appreciation for securing 100% pass in the subject Maintenance Engineering during Apr/ May 2014 Anna university Examinations
3. certificate of Appreciation--June 2010received certificate of Appreciation for securing 100% pass in the subject Basic Civil and Mechanical Engineering during Apr/ May 2010 Anna university Examinations
4. Cambridge International certificate for Teachers and Trainers--9.1.12 to 10.1.12A prestigious certificate at professional level - Cambridge International certificate for Teachers and Trainers was issued for scoring more than 75% marks in the examination conducted by University of Cambridge, International Exams, London through Mission 10X training programme conducted by Wipro technologies Ltd at Thiagarajar college of Engineering, Madurai. Certificate Number: 1N671120184W February (CCA2) 2012
5. Long service certificate--2.1.15Received a Long Service Certificate in appreciation of 10 years of good services with K.L.N. College of Engineering during 14th Founder President Day Celebration held at K.L.N. College of Engineering, Pottapalayam.



Paper Presentation
S.No.TitleFrom DateTo DatePeriodDetails
1. Optimization of process parameters for drilling GFRP Laminates and Analyzing cracks in drilled laminates04-02-2011-2 April 2011National conference on Recent trends in manufacturing Engineering NCRTME’ 11 at SACS MAVMM Engg College, Madurai
2. Effect of Machining parameters on surface roughnessin turning process08-06-2009-6-7 August 2009National Conference on Optimization Techniques and its application in Engineering NCOTEA’09 at Rajalakshmi Engineering College, Thandalam, Chennai
3. Optimization of cutting parameters for surface Finish in end milling process using Taguchi Method.04-04-2008-4 – 5 April 2008National conference on Emerging trends in Engineering & Technology NCETET’08 at RajaRajeswari Engineering College, Chennai
4. Optimization of machining Parameters in Milling Process using GA & SAA04-11-2006-11 – 12 April 2006National Conference on Optimization Techniques in Engineering, Science & Technology - OPTEST’06 at Bannari Amman Institute of Technology, Sathiyamangalam
5. Study of tool wear, chip formation and surface roughness on Machining Copper base alloys using Carbide Tools04-11-2006-11 – 12 April 2006National Conference on Optimization Techniques in Engineering, Science & Technology - OPTEST’06 at Bannari Amman Institute of Technology, Sathiyamangalam
6. Optimization of Process Parameters for Wire EDM using GA04-06-2006-6 -7 April 2006National conference on Emerging technologies in Mechanical Engineering ETME’06 organized by the Dept of Mechanical Engg at PET Engineering College, Vallioor.
7. Machining Parameters Optimization in a Milling Process using GA02-04-2005-4 – 5 Feb 2005National conference on Emerging technologies in Advanced Manufacturing - ETAM’05 organized by the Department of Mechanical Engg at K.L.N College of Engineering
8. Weight minimization of hollow shaft using Simulated Annealing Algorithm--29 – 30 April 2005National Conference on Advanced trends in Design - ATD’05 organized by the Department of Mechanical Engg at Bannari Amman Institute of Technology sathiyamangalam
9. Optimization of Machining Parameters in Milling Process by SAA--24 – 25 March 2006National Conference on Impact of Information technology on manufacturing - NCIITM’06 organized by the Department of Mechanical Engg at Kumaraguru College of Technology, Coimbatore
10. Performance Evaluation of Carbide Tool by Machining Non ferrous Material--24 – 25 March 2006National Conference on Impact of Information technology on manufacturing - NCIITM’06 organized by the Department of Mechanical Engg at Kumaraguru College of Technology, Coimbatore
11. Optimization of Cutting Process Parameters for rotational components using genetic algorithm--24 – 25 March 2006National Conference on Impact of Information technology on manufacturing - NCIITM’06 organized by the Department of Mechanical Engg at Kumaraguru College of Technology, Coimbatore
12. Optimization of Process Parameters for Wire EDM using SAA--21 – 22 April 2006Second National conference on Advances in Manufacturing and Resource Analysis - AMARA’06 organized by the Department of Mechanical Engg at PSNA College of Engg & Technology,Dindigul
13. Optimizing the surface roughness of CNC Turning process using Taguchi technique--13 March 2010CSIR sponsored National Conference on Recent advances in Manufacturing & Material processing - RAMMP'10 organized by the Department of Mechanical Engg at Mookambigai Engg college, Trichy
14. Optimizing the surface finish of CNC Turned parts using Taguchi technique--22-23 April 2010National conference on Emerging technologies in Advanced Manufacturing - ETAM’10 organized by the Department of Mechanical Engg at K.L.N College of Engineering
15. Optimization of process parameters for drilling FRP and analysing cracks in drilled Laminates--30 March 2011National conference on Advances in Mechanical Engineering -AME'11 organized by the Department of Mechanical Engg at Anjalai Ammal Mahalingam Engg College, Koilvenni
16. Optimal design of hollow shaft for Weight minimization using Quantum behaved PSO Algorithm--16.12.11 & 17.12.11International conference on Design and advances in Mechanical Engineering - ICDAAME 2011 organized by the Department of Mechanical Engg at SKP Engineering College, Tiruvannamalai
17. Optimal design of spur gear for Weight minimization using QPSO Algorithm--31.3.12National conference on TCME'12 at SACS MAVMM Engineering College, Madurai
18. Performance evaluation of Differential evolution and particle swarm optimization algorithms for power loss optimization of a worm gear mechanism--25.4.14 to 26.4.14Attended an International conference on Power Electronics and renewable energy sources - ICPERES 2014 organized by EEE department at Rajalakshmi Engineering college, Thandalam, chennai and presented a paper titled "Performance evaluation of Differential evolution and particle swarm optimization algorithms for power loss optimization of a worm gear mechanism"
19. Performance evaluation of Differential evolution and particle swarm optimization algorithms for optimal design of closed coil helical spring--21.3.14 to 22.3.14Attended an International conference on Innovations in Engineering & Technology - ICIET 2014 organized at K.L.N College of Engineering, and presented a paper titled "Performance evaluation of Differential evolution and particle swarm optimization algorithms for optimal design of closed coil helical spring"
20. Optimum design of disc brake using NSGA II algorithm--21.3.14 to 22.3.14Attended an International conference on Innovations in Engineering & Technology - ICIET 2014 organized at K.L.N College of Engineering and presented a paper titled "Optimum design of disc brake using NSGA II algorithm"
21. Multiobjective design optimization of two bar truss using NSGA II and TOPSIS--7.3.14 to 8.3.14Attended an International conference on recent advances in mechanical engineering and interdisciplinary developments - ICRAMID 2014 organized by mechanical department at Ponjesly college of Engineering, Nagercoil and presented a paper titled "Multiobjective design optimization of two bar truss using NSGA II and TOPSIS"
22. optimum design of rolling element bearing using TLBO algorithm--19.4.13Presented a paper titled "optimum design of rolling element bearing using TLBO algorithm" in the national conference on recent advancements in mechanical engineering RAME 2013 at kamaraj college of Engineering & Technology, Virudhunagar
23. Design and analysis of thrust frame for a rocket engine test facility--19.4.13Presented a paper titled "Design and analysis of thrust frame for a rocket engine test facility" in the national conference on recent advancements in mechanical engineering RAME 2013 at kamaraj college of Engineering & Technology, Virudhunagar
24. Design and analysis of cryo piping segment at launch vehicle test facility--19.4.13Presented a paper titled "Design and analysis of cryo piping segment at launch vehicle test facility" in the national conference on recent advancements in mechanical engineering RAME 2013 at kamaraj college of Engineering & Technology, Virudhunagar
25. Performance evaluation of Differential evolution and particle swarm optimization algorithms for the optimal design of hollow shaft--10.4.14 to 11.4.14Attended an International conference on Modeling, Optimization and computing - ICMOC 2014 organized by Mechanical department at Noorul Islam University, Kumarakoil, Nagercoil and presented a paper titled "Performance evaluation of Differential evolution and particle swarm optimization algorithms for the optimal design of hollow shaft"
26. Performance Evaluation of particle swarm optimization Algorithm for the optimal design of belt pulley system--19.12.13 to 21.12.13Attended 4th joint International conference on swarm,evolutionary and memetic computing - SEMCCO 2013 and Fuzzy and neural computing FANCCO 2013 organized by EEE department at SRM university, kattankulathur, chennai and presented a paper titled "Performance Evaluation of particle swarm optimization Algorithm for the optimal design of belt pulley system"
27. Multiobjective design optimization of disc brake using Differential Evolution algorithm--6.1.14 to 8.1.14Attended second International conference on Advances in industrial engineering Applications - ICAIEA 2014 organized by Industrial engineering department at Anna University, chennai and presented a paper titled "Multiobjective design optimization of disc brake using Differential Evolution algorithm"
28. Design Optimization of flywheel using NSGA II algorithm--2.5.14 & 3.5.14Presented a paper titled "Design Optimization of flywheel using NSGA II algorithm" in the second national conference on Materials and Mechanical Engineering (NCMME 2014) at Dr.Mahalingam college of Engineering & Technology, Pollachi during 2.5.14 & 3.5.14
29. Energy conservation by design optimization of flywheel using Flower pollination Algorithm--24-03-2015Presented a paper titled "Energy conservation by design optimization of flywheel using Flower pollination Algorithm" in the National Conference On “Recent Trends And Developments In Sustainable Green Technologies” on 24 March 2015 held at M.I.T, Chromepet, Chennai
30. Multi objective Design Optimization of Helical gear pair using Adaptive parameter Harmony search Algorithm--02-04-2015 to 03-04-2015Presented a paper titled "Multi objective Design Optimization of Helical gear pair using Adaptive parameter Harmony search Algorithm" in the International Conference on Mechanical and Manufacturing Engineering (ICMME 2015) April 2-3, 2015 Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya, Enathur, kanchipuram – 631561 Tamilnadu, India.



Organized Events - Conferences/FDP/Workshop and Others
S.No.TitleFrom DateTo DatePeriodDetails
1. One day workshop on Mechanical Drives - A Practical Approach03-01-2012-1.3.12A one day workshop on Mechanical Drives - A Practical Approach was organized for Third year mechanical students in association with EXEL Textronics, madurai on 1.3.12 at Mechanical seminar Hall. 99 students participated in the workshop. Mr.S.Venkatachalapathy, CEO, Exel Textronics handled technical sessions on various topics related to mechanical drives.
2. certificate of Coordination - Robotryst 2013--9.10.12 to 10.10.12Worked as workshop coordinator in zonal rounds of Robotryst 2013, a national level robotics championship held at KLN College of Engineering organized by Robosapiens technologies pvt ltd in association with Tryst IIT Delhi.
3. Two week AICTE sponsored FDP Programme on “Teaching Methodology for Machine design--29.04.2013 to 12.05.2013Prepared the AICTE proposal for this two week FDP and after approval helped the coordinator in organizing the lectures from outstation experts, arranging for the industrial visits, delivered few lectures and handled tutorial sessions.
4. Faculty Development Programme on “Heat and Mass Transfer” Sponsored by Centre for Faculty Development Anna University, Chennai.--03.12.12 To 10.12.12Prepared the proposal for this one week FDP and after approval helped the coordinator in organizing the lectures from outstation experts and arranging for the industrial visits
5. Teaching Methodology for Transmission system Design--18.3.11 & 19.3.11A two day Faculty Development Programme on “Teaching Methodology for Transmission system Design” sponsored by Anna University of Technology, Madurai was organized during 18.3.11 & 19.3.11 as one of the coordinator. Senior Dean Dr.S.Ganapathy was the other coordinator. Dr.M.R.Thansekhar, HOD / Mech was the Convener. Around 75 participants participated in the FDP. 50 UG students and 10 PG students of our College and 15 Faculties from various Colleges were benefited by the programme.



Seminars/Workshop Attended
S.No.TitleFrom DateTo DatePeriodDetails
1. One day workshop on Hands on training with Matlab03-10-2012-10.3.12One day workshop on Hands on training with Matlab at ECE Department of KLNCE sponsored by ISTE
2. Workshop on Lesson Plan and Class notes preparation12-07-2005-07.12.05 to 2.1.06Attended the workshop on Lesson Plan and Class notes preparation organized by ISTE staff Chapter at K.L.N College of Engineering
3. Hydraulics & Pneumatic Controls12-05-2005-5.12.05 to 10.12.05Attended a one week Faculty Development Programme on Hydraulics & Pneumatic Controls organized at K.LN College of Engg sponsored by Centre for faculty development, Anna University, Chennai.
4. Instructional Design & Delivery06-07-2004-7.6.04 to 12.6.04Attended a one week Faculty Development Programme on Instructional Design & Delivery conducted by Technical Teachers training Institute, Chennai organized at SACS MAVMM Engg College, Madurai
5. Power Plant Engineering--18.4.05 to 23.4.05Attended a one week Faculty Development Programme on Power Plant Engineering organized at R.V.S College of Engg & Technology, Dindigul sponsored by Centre for faculty development, Anna University, Chennai.
6. Computer Aided Manufacturing--21.11.05 to 26.11.05Attended a one week Faculty Development Programme on Computer Aided Manufacturing organized at Sri Krishna College of Engg & Technology, Coimbatore sponsored by Centre for faculty development, Anna University, Chennai.
7. Team Building--31.7.04Attended a one day workshop on Team Building conducted by Prof.Madhavan from Bangalore organized by ISTE staff chapter at K.L.N College of Engineering
8. Application of ANSYS for Global Product Design--20.5.06 to 21.5.06Attended a two day national workshop on Application of ANSYS for Global Product Design sponsored by TEQIP organized by the Department of Mechanical Engg at Government college of Technology, Coimbatore
9. workshop on mechatronics--16.2.07 & 17.2.07Attended a two day workshop on mechatronics organized by the Departments of ECE and Mechanical Engg at PSNA college of Engg & Tech, Dindigul
10. workshop on CFD--16.3.07Attended a one day workshop on Computational Fluid dynamics organized by the Department of Mechanical Engg at J.J College of Engg, Trichy
11. workshop on FEA--24.3.07Attended a one day workshop on Finite Element Analysis organized by the Department of Mechanical Engg at sudharsan college of Engg, pudukkottai
12. Labview basics--30.4.07 to 4.5.07Attended a one week training Programme on Labview basics including practice conducted by virtual instrumentation centre organized by the Department of EEE at PSG college of Tech, Coimbatore
13. Labview Advanced including DAQ, vision and motion--14.5.07 to 18.5.07Attended a one week training Programme on Labview Advanced including DAQ, vision and motion organized by NI systems Ind pvt Ltd, Bangalore in association with PSG – NI virtual instrumentation centre of Department of EEE conducted at PSG college of Tech, Coimbatore
14. Optimization Techniques in Engineering Applications--18.2.10Attended a one day workshop on Optimization Techniques in Engineering Applications organized by the Department of Mechanical Engg at Ultra College of Engg & Tech for women, Madurai
15. Research Methodologies--16.4.10 to 17.4.10Attended a two day workshop on Research Methodologies organized by the Research & Development cell at Syed Ammal Engineering College, Ramanathapuram
16. Research Methodology--24.9.10 to 25.9.10Attended a two day workshop on Research Methodology organized by the Department of Mechanical Engg at K.L.N College of Engineering
17. Towards Mission--19.5.06Attended a one day workshop on Towards Mission organized at K.L.N College of Engineering
18. outcome based NBA Accreditation--5.5.14 to 6.5.14Attended a two day workshop on outcome based NBA Accreditation organized at K.L.N College of Engineering
19. Wipro Mission 10X workshop--22.8.11 to 26.8.11Attended a one week training workshop on Wipro Mission 10X organized by Wipro technology in association with ISTE conducted at Thiagarajar college of Engineering, Madurai
20. Wipro Mission 10X Learning approach--9.1.12 to 10.1.12Successfully completed the Wipro Mission 10X Learning approach and got the practitioners certificate by attending the supporting advanced workshop held at Thiagarajar college of Engineering, Madurai
21. Applications of CFD--9.9.11 to 10.9.11Attended a two day workshop on Applications of CFD organized by the Department of Mechanical Engg at K.L.N College of Engineering
22. FEA Applications in Strength of Materials--29.9.11 to 30.9.11Attended a two day workshop on FEA Applications in Strength of Materials organized by the Department of Mechanical Engg at K.L.N College of Engineering
23. Recent trends in Engineering Tribology and surface characterization--29.9.12Attended a one day workshop on Recent trends in Engineering Tribology and surface characterization TRIBO 2012 organized by the Department of Mechanical Engg at Sri Venkateswara College of Engineering, Sriperumbudur
24. mathematical modeling, simulation and optimization techniques--6.11.13 to 20.11.13Attended a two week Faculty Development Programme on mathematical modeling, simulation and optimization techniques sponsored by AICTE organized by the Department of Mechanical Engg at K.L.N College of Engineering
25. Quality Improvement cell--1.2.14Attended a one day workshop on Quality Improvement cell organized at K.L.N College of Engineering, Nodal centre of Anna University, Chennai
26. Multiobjective evolutionary optimization for Engineering Applications--30.8.13 to 31.8.13Attended a two day national workshop on Multiobjective evolutionary optimization for Engineering Applications & Product / Process Innovation through TRIZ organized by the Department of Mechanical Engg held at JCT college of Engineering & Technology, Coimbatore
27. Computational intelligence in Engineering Applications--20.12.13Attended a one day DST sponsored international workshop on Computational intelligence in Engineering Applications organized by the Department of EEE held at SRM University, kattankulathur, chennai



Others
S.No.TitleFrom DateTo DatePeriodDetails
1. In Plant Training--19.5.03 to 30.5.03Undergone a 12 days in plant training along with 3 students of SACS MAVMM Engg college at Valuthur Gas Turbine Power Project, BHEL, Ramnad.
2. Guest lecture delivered on CAD Applications--14.8.04A lecture on CAD & its applications was delivered during a one day workshop on CAD/CAM organized by Dept of Mech. Engg KLNCE & sponsored by CII madurai chapter.


Home | Site Map | Photo Gallery | Downloads | Useful Links | Contact Us | Grievances | Search
Developed & Maintained by: ISSG (Information Systems Support Group), K.L.N. COLLEGE OF ENGINEERING.
Copyright © 2015 K.L.N. COLLEGE OF ENGINEERING. All rights reserved.
Site Best viewed in Mozilla Firefox & Opera